SUPER MICRO Computer P8SCI, P8SC8 manual Power Supply, Wake-On-Ring WOR Header

P8SC8/P8SCi User’s Manual

motherboard has a 3-pin header (WOL) to connect to the 3-pin header on a Network Interface Card (NIC) that has WOL capability. Wake-On-LAN must be enabled in BIOS. Note that Wake-On-LAN can only be used with an ATX 2.01 (or above) compliant power supply.

Wake-On-Ring (WOR) Header

Wake-up events can be triggered by a device such as the external modem ringing when the system is in the SoftOff state. Note that external modem ring-on can only be used with an ATX 2.01 (or above) compliant power supply.

1-6 Power Supply

As with all computer products, a stable power source is necessary for proper and reliable operation. It is even more important for processors that have high CPU clock rates of 1 GHz and faster.

The P8SC8/P8SCi accommodates 12V ATX power supplies. Al- though most power supplies generally meet the specifications required by the CPU, some are inadequate. A 2 amps of current supply on a 5V Standby rail is strongly recommended.

It is strongly recommended that you use a high quality power supply that meets 12V ATX power supply Specification 1.1 or above. Additionally, in areas where noisy power transmission is present, you may choose to in- stall a line filter to shield the computer from noise. It is recommended that you also install a power surge protector to help avoid problems caused by power surges.

*Warning: Do not use a wrong type of onboard CMOS battery or

install the onboard CMOS battery upside down to avoid any

possible explosion.

1-12