Installation Instructions for LP to Natural Gas Conversion

2 CHANGE BURNER ORIFICES (cont.)

IMPORTANT: Orifices must be located exactly as shown. Carefully read and observe each orifice label for correct location.

SIMMER

 

 

 

 

 

 

 

 

 

 

 

 

The 34SL and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ORIFICES

 

 

 

 

 

 

 

 

 

 

 

 

51SN are for all

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

four burners.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAIN

ORIFICES

C.Install the proper orifices in the exact locations as noted in the illustrations above.

D.Return the LP gas orifices to the bracket and reattach the bracket and the instruction sheet to the pressure regulator using the screw removed previously.

E.Replace the burner bases, heads, caps and top grates.

3ADJUST BURNER FLAMES

A.Turn all burners on highest setting and check the flames. They should be blue (no yellow tipping) when using natural gas. Foreign particles in the gas line may cause an orange flame at first, but this will soon disappear.

B.Turn the cooktop burner knob to “LO” while observing the flame.

Adjust the setting of the upper row of flames using the valve bypass screw as follows:

Adjustments must be made with two other burners in operation on a medium setting. This prevents the upper row of flames from being set too low, resulting in the flame being extinguished when other burners are turned on.

C.To adjust the flame, remove the knobs. Insert a screwdriver through the access hole in valve shaft as shown.

•If the flames were too small or fluttered, open the valve more than the original setting.

•If the flames blew away from the burner, close the valve more than the original setting.

D.Make the adjustment by slowly turning the screw until flame appearance is correct.

E.Testing Flame Stability:

Test 1 – Turn the knob from “HI” to “LO” quickly.

If the upper row of flames goes out at this setting, increase the flame size and test again.

Test 2 – With the burner on “LO”, open and close the cabinet door under the cooktop. If the flame is extinguished by the air currents created by the door movement, increase the flame height and test again.

NOTE: When the burner is on the “SIM” setting, the upper row of flames will go out.

F.Flame Recheck:

After the adjustment is made, turn all burners off. Ignite each burner individually. Observe the flame at the “HI” position. Rotate the knob to the lowest setting and be sure that the flame size decreases as the knob is rotated counterclockwise.

Once the conversion is complete and checked ok, fill out the conversion sticker and include your name, organization and date conversion was made. Apply the sticker near the cooktop gas inlet opening to alert others in the future that this appliance has been converted. If converting back to the original gas, please remove the sticker so others know the appliance is set to use its original gas.

18

Page 17 Page 19
Page 18
Image 18
GE ZGU384LSMSS, ZGU384NSMSS installation instructions Installation Instructions for LP to Natural Gas Conversion
Page 17 Page 19

ZGU384NSMSS, ZGU384L, ZGU384LSMSS, ZGU384N specifications

The GE ZGU384N, ZGU384LSMSS, ZGU384L, and ZGU384NSMSS are premium gas cooktop models that exemplify quality, performance, and modern design. Each model is tailored to meet the diverse needs of home chefs, ensuring that cooking becomes an enjoyable and efficient experience.

The GE ZGU384N is known for its robust construction and reliability. It features a durable stainless steel surface that resists stains and scratches. The cooktop includes four sealed burners that provide precise heat control, which is crucial for achieving the desired cooking results. Its continuous grates offer a seamless surface for sliding pots and pans, enhancing usability. The model's high-output burner delivers intense heat for boiling water or searing meats quickly, while lower BTU burners are perfect for simmering sauces and maintaining delicate flavors.

The ZGU384LSMSS variant boasts a sleek design with a stainless steel finish that complements a modern kitchen aesthetic. It is equipped with backlit knobs that not only provide visual appeal but also enhance functionality by indicating when the burners are on. This model features advanced technology, including electronic ignition for easy, reliable starts, and an automatic re-ignition system that ensures safety by re-lighting the burner if it goes out.

In contrast, the ZGU384L model stands out with its combination of performance and accessibility. It incorporates innovative flame recognition technology that adjusts the flame intensity based on cooking needs, ensuring efficient fuel consumption. Additionally, the model features a dishwasher-safe grates design, which makes maintenance simpler for busy households.

Lastly, the ZGU384NSMSS brings advanced cooking features to the forefront with its reversible cast iron grates, which provide versatility in cooking styles. This model integrates smart features, allowing users to monitor cooking progress through their smartphones. Equipped with high-efficiency burners, it meets the needs of those who prioritize energy conservation without compromising cooking power.

Overall, the GE ZGU384 series combines cutting-edge features, safety, and usability, making them ideal options for both novice cooks and seasoned chefs alike. Whether it's the minimalist aesthetics, powerful burners, or user-friendly technologies, these cooktops are designed to enhance any culinary adventure.
Top Page Image Contents