Installation Preparation
PARTS PROVIDED
Locate the parts packed with the hood.
Duct Transition
with Damper
Heat Lamp
(2 with 48" models)
Allen Wrench
For Implement Rods
2 Stainless Steel Grease Filters
(3 filters with 48" models)
2 Implement Rods and 4
Grease Tray
Wood Support
with Original Screws
Backguard
Warming Shelf
HARDWARE
PACKAGE
Locate and check contents. Screws shown actual size. Note: Hardware appearance may vary slightly.
2 flat washers
for wall anchors
6 (3/16") hollow wall anchors with screws use 2 to secure hood to the wall at the bottom. Use 4 to secure backguard and shelf.
10 Phillips head screws.
Use 6 to secure hood to the
wood support. (2 are secured to wood support) Use 2 to secure 30" and 36" backguards to wall. Use 4 to secure a 48" backguard.
4 Phillips head screws to
secure the duct transition to the hood outlet on the top.
2 Phillips head machine screws to secure shelf to bottom of hood.
2 shoulder screws to secure shelf to bottom of hood.
4 screws to secure the wood
support to the wall
POZIDRIV 3
1 hex head safety screw and lock washer, to secure the blower.
9
