Installation Instructions
STEP 13 CHECK POWER, CLOSE
GRILLE PANEL
•Check to be sure the power cord is plugged into the receptacle.
Raise
Grille
Panel
Electrical
Master LightOutlet
Switch
•Check to make sure power to refrigerator is on by opening refrigerator door to see if interior lights are on.
•The temperature controls are preset at 37°F for the fresh food section and 0°F for the freezer.
•Allow 24 hours to stabilize before making adjustments.
STEP 14 START ICEMAKER
Power Switch
Feeler Arm
Green Power Light
•Flip the switch to I (ON). The icemaker will begin operation automatically.
•Be sure nothing interferes with the sweep of the feeler arm.
•Discard the first full bucket of ice cubes.
•To turn the icemaker off, set the switch to O (OFF).
STEP 15 INSTALL TOEKICK
•Locate the supplied toekick (shipped taped to the side of the refrigerator). Install with 2 screws provided, adjust to desired height and tighten screws.
•A custom toekick can be installed to match or complement the surrounding cabinetry. Use the supplied toekick as a template to cut the shape.
Supplied Toekick
1/4" or Thicker Toekick
INSPECT FINAL INSTALLATION
Check door alignment
Stand back away from the refrigerator to inspect the final installation.
•Check to be sure handles are evenly aligned with each other at the top. To adjust, loosen handle screws and slide up or down. Tighten screws.
•During shipping or the addition of heavy door panels may have caused the doors to move slightly out of alignment.
Door Out of
Alignment
Bushing
Door Hinge
Case Hinge
5/16" Wrench
Raise
•If necessary, the fresh food door may be adjusted up or down to align with the freezer door.
•Use a 5/16" wrench to adjust the hinge pin as shown.
19
