GE Monogram Side by Side Refrigerators 1/4 FRAMED PANEL DIMENSIONS, Dispenser, Cutout Position

Design Guide

1/4" FRAMED PANEL DIMENSIONS

If you choose to install framed panels, they must be cut to the dimensions shown. The panels will slide into the frame on the door and grille.

Non-Dispenser Models

If the custom panel is less than 1/4" thick and it fits loosely in the door frame it can be backed up with a piece of filler material or foam tape to improve the fit.

Door

5/16" Trim Reveal

1/4" Panel

IMPORTANT NOTE: Maximum total panel weight:

•Fresh food door panel – 75 lbs.

•Freezer door panel – 53 lbs.

•Grille Panel – 18 lbs.

IMPORTANT NOTE – DISPENSER MODELS

The refrigerator is supplied with two dispenser trims, one for framed panels and one for overlay panels.

•If the panel is less than 0.250" thick a noticeable gap may be created around the dispenser trim. Foam tape may be applied on the door to improve the fit.

•If the panel is more than 0.250" thick, the dispenser trim cannot be secured to the door.

See Dispenser Trim Fit Example, page 9.

A

Grille Panel

Dispenser	F
Cutout

B

Dispenser Cutout

15-3/8"

9-5/8"

The framed panel must be 1/4" nominal thickness to fit the dispenser trim.

	G
Freezer		Fresh Food
Panel		Panel
	D		E

C								Dispenser
	Side-by-Side (in inches)							Cutout Position
			A	B	C	D	E	F	G
		36” Models	33-7/8	9	68-3/8	14-9/16	18-9/16	17-13/16	3-1/8
	42” Models		39-7/8	9-1/2	68-3/8	14-9/16	24-9/16	17-13/16	3-1/8
	48” Models		45-7/8	9-1/2	68-3/8	18-9/16	26-9/16	17-13/16	5-1/8

7