Step 6
Replace the
oven door
Step 7
Connect
electrical
Installation
30"
• Grasp door firmly on both sides.
• Slide the hinge slots in the bottom of the door over
the hinges.
•Push the door all the way in against oven.
•Open the door fully and push hinge latches down,
as illustrated, on both sides to secure. | Hinge Latch | |
Normal Position | ||
• Close the door and open slowly to be sure it moves | ||
| ||
smoothly. |
|
WARNING
Electrical Shock Hazard
• Electrical ground is required on this appliance.
• Do Not connect to the electrical supply until appliance is permanently grounded.
• Disconnect power to the junction box before making the electrical connection.
• This appliance must be connected to a grounded, metallic, permanent wiring system, or a grounding connector should be connected to the grounding terminal or wire lead on the appliance.
Failure to do so could result in a fire, personal injury or electrical shock.
•When connecting to a
–Connect oven red lead to branch circuit red lead.
–Connect oven black lead to branch circuit black lead.
–Connect oven bare copper conductor and white lead to branch circuit neutral lead (white or gray).
• When connecting to a
– Connect oven red lead to branch circuit red lead.
– Connect oven black lead to branch circuit black
lead.
– Break connection between oven white lead and
oven bare copper conductor.
– Connect oven white lead to branch circuit neutral
lead (white or gray).
– Connect oven bare copper conductor to branch
circuit ground lead (green or bare copper).
Note: Use copper wire only.
12