GE Monogram ZET857DYSB Cabinetry, Built-In Convection Ovens, Framed cabinet, single oven

Framed cabinet

Cabinetry

30" Built-In Convection Ovens

single oven

Front Framed

Partial Overlay Door

Front Framed	30"
Full Overlay Door

29-1/4"

23-1/4"

Allow 3/4" Overlap on Sides. Allow 1" Min. for Top Overlap and Clearance. Allow 1/4" at Bottom for Clearance.

2"x 4" or Equivalent Runners or Solid Shelf

17-3/4"

28" Min.

28-3/8" Max.

23" Max.

23-1/2" Min.

Inside Depth

34"

Recomended

17-3/4" Allow Minimum of 17-3/4" for Clearance to Adjacent Corners, Drawers, or Walls, etc.

Use the information in this dimension drawing for typical framed cabinets. The front face of the oven will be flush with cabinetry doors or drawers.

Order a single oven cabinet.

Rough opening for single oven must be:

•Depth—23-1/2" min. from inside back to front of cabinet frame.

•Width—28" min., 28-3/8" max.

•Height—23" max.

•34" from floor is recommended to bring oven door to countertop height when opened.

•All Monogram ovens require 3/4" overlap on both sides. Allow 1" min. for top overlap and clearance to upper doors.

•Oven overlaps will conceal raw edges on top and both sides of cutout.

Single ovens can be installed below a countertop. Use the cutout dimensions shown on this page. If the cabinets being used have an opening that is taller than the maximum dimensions shown, filler panels can be made to fill the gaps. See Cabinetry Modifications Suggestions on page 13 for more information.

6