To light the grill
Lighting Using the Control Knob
WARNING:
•Always open the hood prior to lighting.
•Always keep your face and body as far away from the grill as possible when lighting.
Open the hood, push and turn the grill control knob to the LITE position and hold. You will hear a snapping sound, which is the igniter sparking. Once lit, turn the control knob to the desired setting.
If the burner does not light in 4 seconds, turn the knob to OFF and wait 5 minutes for any accumulated gas to dissipate before trying again.
NOTE: All igniters spark
simultaneously whenGrill control knob pressing in any burner
control knob.
IMPORTANT: The grill may smoke for a few minutes the first time it is used due to factory process oils. Run one complete
on HIGH to assure all oils are burned off.
Lighting Using a Match
WARNING:
•Always keep your face and body as far away from the grill as possible when lighting.
A match stick extension rod is provided inside the grill drip tray. To match light a main grill burner, insert the UNLIT match stick securely into the clip end of the extension rod. Light the match stick and, holding the end of the rod, pass the flame of the lit match through the grill grate, past the heat diffuser directly in front of a burner port . Push and turn the control knob, which is centered on the burner you are trying to light, to the LITE position. Once lit, turn the control knob to the desired setting.
Wait 5 minutes before attempting to relight a burner.
If the burner did not light in 4 seconds,
turn all control knobs to OFF, leave the hood open to allow any accumulated gas to dissipate and wait 5 minutes before trying to light it again. If the burner will not light after several attempts, see the Problem Solver in the back of this manual.
13
