GE Monogram ZGG420LBPSS owner manual Wheels, Security loop Custom grill cover, Fuse replacement

Fuse replacement

IMPORTANT: Never install grill light bulb(s) rated higher than 10 watts. This will cause the fuse to blow.

1.See Steps 1–3 of the Battery Replacement section to access the fuse in the battery/fuse mounting assembly.

2.Unscrew the fuse cover and remove the blown fuse.

Unscrew fuse cover

3.Replace with a new 2-amp glass fuse and replace the cover.

Glass fuse

Wheels

(free-standing grill only)

The lock mechanism for the wheels is on the left front wheel on all models. Always set the lock mechanism on the free-standing grill before using.

If the wheels develop a squeak after exposure to the elements, lubricate the axle at the center of the wheel with a silicone spray or other general-purpose lubricant .

Wheel with lock mechanism

Security loop

Custom grill cover

A stainless steel loop is welded to the bottom of the free-standing grill chassis near the back right wheel. To secure the grill, put a chain through the steel loop and padlock through a stationary,

secured eyelet (chain, padlock and eyelet not provided).

Loop for securing free-standing grill with a chain (located on grill chassis bottom near the back right wheel)

Clean the cover with warm, sudsy water and rinse.

(on some models)	NOTE: Lower the side shelves (on free-standing
	models only) before using the grill cover.	29