Gefen EXT-COMPAUD-CAT5-444 user manual 4X4 Component Matrix Over CAT-5 Back Panel Descriptions

4X4 COMPONENT MATRIX OVER CAT-5 BACK

PANEL DESCRIPTIONS

1Component With Audio Extension Input

Connect the included jumper cables between the Component With Audio Outputs (Item 5 on this page) and these inputs. Inputs include component video, analog audio, and digital audio connectors. There are 4 inputs that are used in conjunction with the CAT-5 output ports for extension.

2IR Blaster Outputs

Connect IR emitters/blaster (sold separately, part# EXT-2IREMIT) to these output ports. Each output is linked to one of the extension receivers. IR information is relayed from each remote location and is sent to these blasters for control of local equipment from the extended location. Place the blaster “eye” on or near the IR receiver of the connected equipment.

3CAT-5 Extension Ports

Connect user supplied CAT-5e cables between these ports and the 4x4 Component Audio Over CAT-5 Receivers at remote locations. These cables will transmit the component and audio signals to the remote locations while receiving IR data from each receiver.

4RS-232 Serial Control Interface

This port is used for control of the 4x4 Component Audio Over CAT-5 by RS-232 serial communication. Please see page 14 for more information.

5Component With Audio Outputs

Connect the included jumper cables between the Component With Audio Extension inputs (Item 1 on this page) and these inputs. Outputs include component video, analog audio, and digital audio connectors. There are 4 outputs.

6Component With Audio Inputs

Connect the component video and audio source devices to these input ports using the supplied component and audio cables. Up to 4 sources can be connected at one time. Inputs include component video, analog audio, and digital coaxial connectors.

724V DV Power Input

Connect the included 24V DC power supply to this input.

7