RMT-4IR REMOTE DESCRIPTION
LED Indicator
Input Selection
Buttons
Each extended location with a 4x4 Component Matrix Over CAT-5 Receiver can use an RMT-4IR remote control to choose which source will be viewed by the attached display. Pressing the numbered buttons will switch to the source connected to the same numbered input on the 4x4 Component Matrix Over CAT-5.
To use the RMT-4 IR remote, remove the battery cover on the back of the remote to reveal the battery compartment. Insert the included battery into the open battery slot. The positive (+) should be facing up. Ensure that the both dip switches are in the OFF position. Replace the battery cover. The remote ships with 2 batteries. One battery is needed for operation and the other battery is complimentary.
Empty Battery Slot
IR Code Dip Switches
