9
IR Receiver1 This receiver will receive commands from both the included RMT-4IR remote
control and from other commercial IR remote controls. IR commands from
commercial IR remote controls are relayed from this unit back to the 4x4
Component Audio Over CAT-5 sending unit where they will be output by the
attached IR Blasters.
Selected Source LED2 The currently selected source that is being displayed on the attached monitor
will be visually acknowledged by an active LED. There are 4 LEDs, one for each
source.
Brightness & Focus Adjustment Trim Pots3 Brightness and focus Trim Pots are available for fi ne tuning the output video
signal. Please see page 14 for more information and instructions on usage.
5V DV Power Input4 Connect the included 5V DV power adapter to this input. Once a proper
connection is made the power LED indicator should become active.
Component Video Output5 Connect the component display to this output using user supplied cables.
CAT-5 Extension Port6 Connect a user supplied CAT-5e cable between the CAT-5 extension ports on
the 4x4 Component Audio Over CAT-5 sending unit and this port.
Analog RCA Stereo Audio Output 7 Connect this output to either the display’s analog audio input or a receiver’s
analog audio input using user supplied analog audio cables.
Digital Coaxial Audio output8 Connect this output to either the display’s digital coaxial audio input or a
receiver’s digital coaxial audio input using a user supplied digital coaxial audio
cable.
Digital Optical Audio output9 Connect this output to either the display’s digital optical audio input or a
receiver’s digital optical audio input using a user supplied digital optical audio
cable.
IR Extension Port10 Connect the optional IR Receiver Extension (part# EXT-RMT-EXTIR) to this
port.
Direct Select Buttons11 Use buttons 1 through 4 to select what source the connected display will be
view.
4X4 COMPONENT AUDIO OVER CAT-5 RECEIVERPANEL DESCRIPTION