INTRODUCTION
Congratulations on your purchase of the 4x4 Component Matrix Over CAT-5. Your complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products supplement cross-platform computer systems, professional audio/video environments and HDTV systems of all sizes with hard-working solutions that are easy to implement and simple to operate.
The Gefen 4x4 Component Matrix Over CAT-5
The Gefen 4x4 Component/Audio CAT5 Matrix offers unprecedented flexibility and convenience by routing high definition video and analog/digital audio from any of four Component video sources to any of 4 remote displays over inexpensive, standard CAT5 cabling.
Each remote display has a control box that allows the viewer to select any of the 4 video sources and control that source via an IR remote control as if the viewer was standing in the room where the source originates.
Full High-Resolution HDTV signals are supported up to a resolution of 1080p at a maximum distance of 1000 feet. The Gefen 4x4 Component/Audio CAT5 Matrix works with any Component video source including DVD players, cable boxes, and satellite set-top boxes that connect to a Component display. Every source is accessible at all times by any display by selecting it with the IR remote.
How It Works
You simply connect up to 4 local Component video and analog/digital audio sources to the CAT5-Matrix’s inputs. Connect the included 1-foot loop back cables into the upper board for the CAT5 extension function. Then run each of your CAT5 cables from the Matrix to the remote displays. At each remote display, terminate the CAT5 cable run with a Component/Audio CAT5 Receiver device. Connect each Receiver to a display and your analog/digital audio equipment and you’re all set.
