Gefen EXT-COMPAUD-CAT5-444 user manual 4X4 Component Matrix Over CAT-5 Front Panel Descriptions

4X4 COMPONENT MATRIX OVER CAT-5 FRONT

PANEL DESCRIPTIONS

1Power LED Indicator

This LED will become active once the included 24V DC power adapter is properly connected.

2Output 1 Source LED Indicator

The currently selected source being displayed on Monitor Output 1 will be visually acknowledged by an active LED. There are 4 LED’s, one for each input source.

3Output 2 Source LED Indicator

The currently selected source being displayed on Monitor Output 2 will be visually acknowledged by an active LED. There are 4 LED’s, one for each input source.

4Output 3 Source LED Indicator

The currently selected source being displayed on Monitor Output 3 will be visually acknowledged by an active LED. There are 4 LED’s, one for each input source.

5Output 4 Source LED Indicator

The currently selected source being displayed on Monitor Output 4 will be visually acknowledged by an active LED. There are 4 LED’s, one for each input source.

6IR Receiver

This port will receive IR commands from the included RMT-16IR remote control.

7Power Button

Pressing this button while the unit is on will place the unit in stand-by mode. Pressing this button again while the unit is in stand-by will turn it on.

8Output 1 Source Button

Each press of this button will cycle through the 4 inputs which will be displayed on the Monitor Output 1.

9Output 2 Source Button

Each press of this button will cycle through the 4 inputs which will be displayed on the Monitor Output 2.

10Output 3 Source Button

Each press of this button will cycle through the 4 inputs which will be displayed on the Monitor Output 3.

11Output 4 Source Button

Each press of this button will cycle through the 4 inputs which will be displayed on the Monitor Output 4.

5