QUICK START GUIDE:
1POWER: Press the POWER (1) button to turn on the CD player.
NOTE: MAKE SURE VOLTAGE SELECTOR SWITCH (36) IS SET BEFORE USE.
2DISC IN/OUT SLOT: This CD player is a
NOTE: DO NOT FORCE A DISC INTO THE SLOT WHEN THE POWER TO THE UNIT IS OFF. (8 cm discs may have a loading problem.)
3DISC IN/OUT LED: The DISC IN/OUT LED (3) blinks for disc insertion and remains solid while a disc is in the player.
4DISPLAY: The DISPLAY (4) shows the various functions for the CD player. See FUNCTION DESCRIPTIONS for details.
5PLAYBACK DISPLAY BAR: The PLAYBACK DISPLAY BAR (5) shows the TIME ELAPSED and TIME REMAINING.
6PLAY/PAUSE: Press PLAY/PAUSE (6) button to activate PLAY or PAUSE mode. See CUE or ROBO START INSTRUCTIONS for details.
7TRACK SKIP: Pressing TRACK SKIP (7) buttons select which track to play.
8SEARCH DIAL: Use the SEARCH DIAL (8) to scan forward and reverse directions on a TRACK.
9DIRECT ACCESS: Use the DIRECT ACCESS (9) keys to select exactly which track to play or to set a precise CUE POINT.
10JOG WHEEL: The JOG WHEEL (10) has various functions: SCRATCH mode, PITCH BEND, CUEING, and EFFECTS.
11STOP/EJECT: Press STOP/EJECT (11) once to stop, twice to eject, and hold down to eject the CD.
12TIME: Tap the TIME (12) button to switch the time preference in three modes: TOTAL TIME REMAINING, TIME REMAINING, TIME ELAPSED.
(13-15) SEAMLESS LOOP BUTTONS:
13FLY CUE1: FLY CUE1 (13) sets a CUE POINT on the fly.
14CUE
15RETURN: To play from a saved CUE POINT or a SEAMLESS LOOP, press RETURN (15) to play the LOOP or the CUE again.
16CUE 1/PREVIEW: Tap CUE 1/PREVIEW (16) to come back to a set CUE or press and hold to PREVIEW from a CUE, refer to CUE INSTRUCTIONS.
17HOT START CUE1: Press HOT START CUE1 (17) to instantly return to and play from a CUE POINT.
18AUTO CUE SINGLE/CONTINUOUS: Tap AUTO CUE SINGLE/CONTINUOUS (18) for: AUTO CUE SINGLE, CONTINUOUS, and NORMAL modes.
19SET CUE: Use SET CUE (19) as a trigger for HOT STARTS
20HOT STARTS (CUE2, CUE3, CUE4): HOT STARTS CUE
21ROBO START: Using ROBO START (21) lets you alternate play between 2 Gemini
22MASTER TEMPO: MASTER TEMPO (22) locks in the music’s PITCH even with no change in vocal or instrument tone.
23PITCH: The PITCH (23) button activates the PITCH CONTROL SLIDE (25) indicated by the red LED light above the button.
24VPS (VARIABLE PITCH SELECTOR) 4%, 8% and 16%: VPS (24) use to change the pitch settings from 4%, 8%, and 16%.
25PITCH CONTROL SLIDE: The PITCH or BPM of a track will change (+ or
26BPM/PITCH (PITCH BEND - or +): Pressing BPM/PITCH (26) buttons together switches from BPM or PITCH BEND mode. When in BPM or PITCH mode, the buttons for BPM/PITCH (26) will raise or lower the pitch percentage or BPM - or + 4%.
27ZOOM: Pressing the ZOOM (27) effect button changes the delay time, producing a flanger effect, by rotating the jog wheel.
28FILTER: Pressing the FILTER (28) effect button changes the cutoff frequency of the playback sound when the jog wheel is rotated.
29REVERSE: Tap the REVERSE (29) button to play your musical selection backwards.
30THE BRAKE: Pressing PLAY or PAUSE with BRAKE (30) on, makes the CD sound just like a RECORD stopping.
31HOLD: Press HOLD (31) after you press ZOOM (27) or FILTER (28) to keep the parameters held for the effect chosen.
32SCRATCH: Press the SCRATCH (32) button to make the cd “SCRATCH” like a RECORD.
33DIGITAL OUTPUT JACK (BNC): Use the BNC (33) to connect to any type of device that accepts digital signals.
34LINE OUTPUT JACKS: LINE OUTPUT JACKS (34) provide stereo sound via RCA cables to your mixer or receiver.
NOTE: MAKE SURE CABLES ARE PLUGGED IN TIGHT FOR OPTIMAL SOUND.
35ROBO START JACK: ROBO START JACK (35) is used to connect two CD player’s to use the ROBO START (21) feature.
NOTE: MAKE SURE ROBO START CABLE IS PLUGGED IN TIGHT FOR ROBO START (21).
36VOLTAGE SELECTOR SWITCH: To set the proper voltage, adjust the VOLTAGE SELECTOR SWITCH (36) to 115 or 230 volts.
37POWER JACK (AC IN): Connect the power plug into the POWER JACK (37) for power.
(2)
