Generac Power Systems 004700-00 ‹ 2.2.5 COMPARTMENT FLOOR CUTOUTS, 7 - Typical Noise Abatement

Section 2 – Installation

•Line the compartment door interior (except for air openings) with suitable, fireproof sound insulation (such as 1-inch (25 mm) thick fiberglass with a 2- pound density).

Figure 2.7 – Typical Noise Abatement

Recreational Vehicle Generator

‹2.2.5 COMPARTMENT FLOOR CUTOUTS

Provide openings in the generator compartment for the following items (Figure 1.2):

•Engine exhaust and cooling air outlets

•Generator cooling air inlet

•Four holes for passage of generator mounting bolts. See Section 2.1.4.

DANGER

 Fuel lines and exhaust piping must not pen- etrate into the vehicle living area.

	Figure 2.8 – Compartment Floor Cutout (Drawing 0D8716-G)
			VIEW FROM TOP
			717.7
		423.2	[ 28 1/4"]
	TYP.			5/16"-18 WELDNUTS
		[ 16 11/16"]	343.4
	6.7			(6 PLACES)
	[ 1/4"]	82.5	[ 13 1/2"]
		[ 3 1/4"]
		50.8			NOTE: ALL AIR
			60		KEPT CLEA
		[2"]			IS REQUIRE
476.4			[ 2 3/8"]
					118
[ 18 3/4"]
			210	170	[ 4 5/8"]
	HOT AIR
			[ 8 1/4"]	[ 6 11/16"]
	EXHAUST

429.5	416			AIR	414.5
	[ 16 3/8"]				[ 16 5/16"]
[ 16 15/16"]				INTAKE
		TAIL PIPE			360.5
					[ 14 3/16"]
		EXIT	79
376.5
		101	[ 3 1/8"]	83.5
[ 14 13/16"]
		[ 4"]			223.5
				[ 3 5/16"]
					[ 8 13/16"]
					176.6
					[ 6 15/16"]
				36.5 [ 1 7/16"]
55.5	48.1				63.5
[ 2 3/16"]	[ 1 7/8"]	222.7
					[ 2 1/2"]
		[ 8 3/4"]
	29
		300.7		OIL DRAIN
	[ 1 1/8"]	[ 11 13/16"]
			369.7
			[ 14 9/16"]
			688.3
			[ 27 1/8"]
				736.4
			REF.	[ 29"]	RE

All measurements are in millimeters, 25.4 mm = 1”.

25