Operator's Manual | First Edition • Eighth Printing |
|
|
|
|
Transport and Lifting Instructions
5 | Lock the rear base casters. |
Observe and Obey:
The transport vehicle must be parked on a level surface.
The transport vehicle must be secured to prevent rolling while the machine is being loaded.
Be sure the vehicle capacity, loading surfaces and chains or straps are sufficient to withstand the machine weight. See the serial plate for machine weight.
The machine must be secured to the transport
vehicle with chains or straps of ample load capacity.
6Place the machine against the vehicle. Use proper lifting techniques to load the machine into the transport vehicle. Be sure to check that the carriage is locked in the lowered position.
7Use a minimum of 1 chain or strap to secure the machine to the truckbed. Place the chain or strap over the mast. Placing the chain or strap over the legs can damage the legs.
Loading the Machine
Be sure to remove the load handling attachment from the machine and place the stabilizers in the stored position.
1Fully lower the carriage, to lock for transport.
2Rotate the carriage
3Raise the carriage until it contacts the carriage
4Adjust the loading wheels to the desired position. Be sure the pin is properly inserted.
8To unload, follow the loading instructions in reverse order.
Loading Machine with a Crane
Be sure to place the legs and stabilizers in the stored position.
Be sure to inspect the machine and remove any loose or unsecured items.
Use the lifting bracket on the top of the rear mast column.
Always place the lifting hook through the lifting bracket so that it points away from the machine.
22 | Genie Superlift Contractor | Part No.33547 |
