Operator's Manual | First Edition • Eighth Printing |
|
|
|
|
FUNCTION TESTS
Function Tests
1Select a test area that is firm, level and free of obstructions.
Setup
Machines Without Stabilizers
1Remove the leg retainer pin and lower the leg to the down position. Insert the pin through the leg and base.
Machines With Stabilizers
1Push down to release the stabilizer lock plates and lower the stabilizers until the
casters are in full contact with the ground. Be sure the stabilizers are locked in the down position.
2Remove the leg retainer pin and lower the leg to the down position. Insert the pin through the leg and base.
Load Handling Attachments
Standard Forks and Standard Fork Options
1Place the forks inside the carriage.
2Insert the retaining pin.
Load Platform with Standard Forks
1Place the load platform securely on the standard forks.
Pipe Cradle
1Attach the pipe cradles to the forks. Be sure the fasteners are tightened.
Fork Extension
1Slide each extension tube onto the fork.
2Adjust to the desired position and insert the retaining pins.
10 | Genie Superlift Contractor | Part No.33547 |
