Operator's Manual | First Edition • Eighth Printing |
|
|
|
|
SAFETY RULES
Fall Hazards
Do not use as a personnel lifting platform or step.
Do not stand on the load handling attachments.
Do not climb on the mast.
Tip-over Hazards
Do not raise the load unless the stabilizers (if equipped) and legs have been fully lowered and locked and the casters are in full contact with the ground.
Do not raise the load unless the leg retainer pins are properly inserted through the leg and the base.
Do not remove the leg retainer pins while the machine is loaded and/or raised.
Do not raise the load unless the machine is on a firm, level surface.
Prior to use, check the work area for
Do not raise the load unless the load handling attachment is properly secured to the machine.
Do not use blocks to level the machine.
Do not move the machine with a raised load, except for minor positioning.
Do not operate the machine in strong or gusty winds. Increasing the load surface area will decrease machine stability in windy conditions.
Do not leave a load raised when windy conditions may occur unless the machine(s) are properly guy- wired.
Do not exceed the rated load capacity. See Load Capacity Charts section.
Avoid debris and uneven surfaces while rolling a machine with the legs folded up.
Do not replace machine parts critical to stability or structure with items of different weight or specification.
Do not cause a horizontal force or side load to the machine by raising or lowering a fixed or overhanging load.
2 | Genie Superlift Contractor | Part No.33547 |
