First Edition • Eighth Printing | Operator's Manual | |
|
|
|
|
|
|
Do not place ladders or scaffolding against any part of the machine.
Do not use the machine on a moving or mobile surface or vehicle.
Collision Hazards
Check the work area for overhead obstructions or other possible hazards.
Do not tilt the machine back unless the area is clear of personnel and obstructions.
Use common sense and planning when transporting the machine on an incline or slope.
Do not load for transport unless the machine and vehicle are on a level surface. Use proper lifting techniques to load the machine.
Lifting Hazards
Use proper lifting techniques to load or tip the machine.
Use proper lifting techniques when installing or removing the load handling attachments.
SAFETY RULES
Electrocution Hazards
This machine is not
electrically insulated and will not provide protection from contact with or
proximity to electrical
current.
Keep away from the machine if it contacts
energized power lines. Personnel must not touch or operate the machine until power lines are shut off.
Maintain safe distances away from electrical power lines and apparatus in accordance with applicable governmental regulations and the following chart.
Voltage | Minimum Safe | |||
|
| Approach Distance | ||
|
|
|
|
|
Phase to Phase | Feet | Meters | ||
|
|
|
| |
0 to 300V | Avoid Contact | |||
300V to 50KV | 10 | 3.1 |
| |
50KV to 200KV | 15 | 4.6 |
| |
200KV to 350KV | 20 | 6.1 |
| |
350KV to 500KV | 25 | 7.6 |
| |
500KV to 750KV | 35 | 10.7 |
| |
750KV to 1000KV | 45 | 13.7 |
| |
Allow for mast movement and electrical line sway or sag, and be aware of strong or gusty winds.
Do not use the machine as a ground for welding.
Part No.33547 | Genie Superlift Contractor | 3 |
