Second Edition • Second Printing | Operator's Manual | |
|
|
|
|
|
|
Pre-operation Inspection
oBe sure that the operator's, safety and responsibilities manuals are complete, legible and in the storage container located on the platform.
oBe sure that all decals are legible and in place. See Decals section.
oCheck for hydraulic oil leaks and proper oil level. Add oil if needed. See Maintenance section.
oCheck for battery fluid leaks and proper fluid level. Add distilled water if needed. See Maintenance section.
Check the following components or areas for damage, improperly installed or missing parts and unauthorized modifications:
oElectrical components, wiring and electrical cables
oHydraulic power unit, tank, hoses, fittings, cylinders and manifolds
oBattery pack and connections
oDrive motors
oWear pads
oTires and wheels
oLimit switches, alarms and horn
oNuts, bolts and other fasteners
oPlatform entry chain (if equipped)
oPlatform entry gate (if equipped)
oBeacon and alarms (if equipped)
oBrake release components
oSafety arm
oPothole guards
oPlatform extension
oScissor pins and retaining fasteners
oPlatform control joystick
oGenerator (if equipped)
oCounterweight (if equipped)
Check entire machine for:
oCracks in welds or structural components
oDents or damage to machine
oBe sure that all structural and other critical components are present and all associated fasteners and pins are in place and properly tightened.
oSide rails are installed and bolts are fastened
oBe sure that the chassis trays are in place, latched and properly connected.
Part No. 82784 | Genie | 13 |
