Operator's Manual | Second Edition • Second Printing | |
|
|
|
|
|
|
FUNCTION TESTS
Test the Function Enable Switch
16Do not hold the function enable switch on the control handle.
17Slowly move the control handle in the direction indicated by the blue arrow, then in the direction indicated by the yellow arrow.
Result: No functions should operate.
Test the Up/Down Functions
18 Press the lift function select button.
19Press and hold the function enable switch on the control handle.
20Slowly move the control handle in the direction indicated by the blue arrow.
Result: The platform should raise. The pothole guards should deploy.
21 Release the control handle.
Result: The platform should stop raising.
22 Press and hold the function enable switch. Slowly move the control handle in the direction indicated by the yellow arrow.
Result: The platform should lower. The descent alarm should sound while the platform is lowering.
When lowering the platform, the platform should stop when it is 2.1 m from the ground. Be sure the area below the platform is clear of personnel and obstructions before continuing. To continue lowering, release the control handle, wait 5 seconds, then move the control handle again.
Test the Steering
Note: When performing the steer and drive function tests, stand in the platform facing the steer end of the machine.
23 Press the drive function select switch.
24Press and hold the function enable switch on the control handle.
25Depress the thumb rocker switch on top of the control handle in the direction identified by the blue triangle on the control panel.
Result: The steer wheels should turn in the direction that the blue triangle points on the control panel.
26Depress the thumb rocker switch in the direction identified by the yellow triangle on the control panel.
Result: The steer wheels should turn in the direction that the yellow triangle points on the control panel.
18 | Genie | Part No. 82784 |