![Transport Instructions](/images/new-backgrounds/46550/4655057x1.webp)
Second Edition • Second Printing | Operator's Manual | |
|
|
|
|
|
|
Transport Instructions
Observe and Obey:
Common sense and planning must be applied to control the movement of the machine when lifting it with a crane or forklift.
The transport vehicle must be parked on a level surface.
The transport vehicle must be secured to prevent rolling while the machine is being loaded.
Be sure the vehicle capacity, loading surfaces and chains or straps are sufficient to withstand the machine weight. See the serial plate for the machine weight.
The machine must be on a level surface or secured before releasing the brakes.
Brake Release
Operation
1Chock the wheels to prevent the machine from rolling.
2Be sure the winch line is properly secured to the drive chassis tie points and the path is clear of all obstructions.
3Turn the brake release knob counterclockwise to open the brake valve.
4Pump the brake release pump knob.
After the machine is loaded:
1Chock the wheels to prevent the machine from rolling.
2Turn the brake release knob clockwise to reset the brakes.
Towing the Genie
Securing to Truck or Trailer for Transit
Turn the key switch to the off position and remove the key before transporting.
Inspect the entire machine for loose or unsecured items.
Use chains or straps of ample load capacity.
Use a minimum of 2 chains or straps.
Adjust the rigging to prevent damage to the chains.
Part No. 82784 | Genie | 27 |