Second Edition • Second Printing | Operator's Manual | |
|
|
|
|
|
|
Do not replace items critical to machine stability with items of different weight or specification.
Do not use the machine on a moving or mobile surface or vehicle.
Be sure all tires are in good condition, castle nuts are properly tightened and cotter pins are properly installed.
Do not use batteries that weigh less than the original equipment. Batteries are used as counterweight and are critical to machine stability. Each battery must weigh 30 kg.
Do not use the machine as a crane.
Do not push the machine or other objects with the platform.
Do not contact adjacent structures with the platform.
Do not tie the platform to adjacent structures.
Do not place loads outside the platform perimeter.
Do not operate the machine with the chassis trays open.
Do not use the platform controls to free a platform that is caught, snagged or otherwise prevented from normal motion by an adjacent structure. All personnel must be removed from the platform before attempting to free the platform using the ground controls.
SAFETY RULES
Fall Hazards
The guard rail system provides fall protection. If occupants of the platform are required to wear personal fall protection equipment (PFPE) due to job site or employer rules, PFPE equipment and its use shall be in accordance with the PFPE manufacturer’s instructions and applicable governmental requirements.
Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform floor at all times.
Do not climb down from the platform when raised.
Keep the platform floor clear of debris.
Attach the platform entry chain or close the entry gate before operating.
Do not operate the machine unless the guard rails are properly installed and the entry is secured for operation.
Part No. 82784 | Genie | 5 |
