2.4. Motion Detection Setting
To Configure Motion Area :
1.Select Camera number button to configure the desired camera.
2.Select Category for “GRID ”. Settings are shown at default levels.
1)Motion Level : The sensitivity settings are : 1: Low sensitivity ~ Level 20: High sensitivity. By default , the level is set to 10.
2)Motion Grid : The area property is highlighted and motion detection can now be observed in the view window. By default, it’s set to OFF.
: Select All. Press [Enter] to select.
: : Clear All. Press [Enter] to select.
: Select specific. Press [Enter] to select.
To define the motion view area
On the front panel or remote control, press any of direction buttons to highlight a cell in the motion detection area, then press [INC/+] . This area is selected and the cells are highlighted in a blue colour.
37
