5. Spot Monitor
In addition to the Main Monitor, attaching a Spot Monitor enables user to monitor specific channels independently form the main monitor. Press [Spot] button on the remote controller, DVR will be changed into SPOT mode.
Spot Number, Spot Status
1)[INC/DEC]: Sport out control will be changed from SPOT
2)[Spot/Cancel]: Press Spot buttons for 2 seconds or [CANCEL] button to exit Main Monitor.
If there is no input, it will automatically exit into Main mode after 5 seconds.
3)[#CH] – Press Spot button on remote controller, then press number button you wish watch as full screen.
4)[Display]- Press Spot button then [Display] for 2 seconds to start auto switch cameras. Sequence interval can be set from the Sequential Setup.
28
