Genie GDVRH-616, GDVRH-604, GDVRH-608 manual Record General, Approximate File Size

3.1. Record General

1.The menus are displayed with options in the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the directional

buttons [ ] .

2.Change the options shown below using the [DEC/INC] buttons.

1)Schedule Use: This enables or disables Night Zone. By default “OFF”.

2)Boot up Record: The DVR starts recording without pressing the [REC] button when it is set to “ON”.

3)Disk Overwrite: Selects the record policy of the hard disk drive.

-ON: By default, the hard disk drive overwrites from the beginning when it becomes full.

-OFF: Stops recording when the HDD is full.

4)Auto Delete: Allows you to configure when the DVR automatically deletes all data from HDD. It leaves the data for a selected duration from the current time. [NONE  12HOURS  1DAY~ 6DAYS  1WEEK ~ 4WEEKS-> 30 DAYS]

5)Pre-Record: Determines the duration the DVR stores recorded video prior to the beginning of Event Recoding [5SEC ~ 300 SEC]. By default 5 sec.

6)Post- Record: Determines the duration the DVR continues to record for after an Event detection [5SEC ~ 300 SEC]. By default 5 sec.

<Note> 1. Alarm/Motion Duration is extended if there is another Alarm/Motion detected whilst Event Recording.

2.When recording, the Pre-Record and Post-Record will not be activated.

3.To save changes and exit the menu, press the [MENU] button.

To exit the menu without making changes, press the [CANCEL] button.

<Approximate File Size>

39