5)To escape from PTZ mode, press the ESC button on the PTZ controller. Or click right button, outside the control box, to return to the virtual remote controller. Then click the ESC button.
2. Preset & Tour
Button | Function |
| Set preset position; SPOT OUT on remote controller |
| Move the PTZ into the desired location. |
| Press the Preset button. |
| Custom 1 illuminates. |
| Set the # for the Preset location. |
| Press Enter to save and exit. |
|
|
| Go to preset position; INFO on remote controller |
| Press Go to button. |
| Enter the desired Preset # and press Enter. |
|
|
| Start Auto Tour; BACKUP on remote controller |
| Press Auto Tour Button. |
| Press the + button and enter the range of Preset and press Enter. |
|
|
76
