Genie GDVRH-604, GDVRH-616, GDVRH-608 manual VII. PAN/TILT Zoom Control, T.Z. Menu

<Note > Please Refer to the Help Menu for specific

VII. PAN/TILT ZOOM CONTROL

PTZ control is available for supported third-party dome cameras. The PTZ option must be configured for each camera channel. For PTZ setup, refer to Camera Menu> PTZ setup.

The layout of the PTZ interface conforms to the layout of the front of the DVR or the remote controller. Menu button is the guide anchor position for all other buttons. When in PTZ interface mode, all buttons are used for the PTZ related operation.

1.P.T.Z. Menu

1)To activate the Pan/Tilt Control, select the full screen display of the camera you wish to control.

2)Then press the [P/T/Z/FOCUS] button. A shortcut Menu box pops up, as shown below.

INDICATOR	ACTIONS
	Press this button to display “HELP” Menu. Press [ENTER] Button again, or
	[CANCEL] button to cancel Help Menu.
[ENTER]
[CANCEL]
	Press this button to cancel “PAN/TITL” Operation.
	PTZ camera control interface is extended to use all functions. Press this
	button again to go to the short-cut menu.
[MENU] Button
	To Tilt Up and Down.
	To Pan Right and Left.
	74