Second Edition · Third Printing | Operator's Manual |
|
|
|
|
Pre-operation Inspection
oBe sure that the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located in the platform.
oBe sure that all decals are legible and in place. See Decals section.
oCheck for engine oil leaks and proper oil level. Add oil if needed. See Maintenance section.
oCheck for hydraulic oil leaks and proper oil level. Add oil if needed. See Maintenance section.
oCheck for engine coolant leaks and proper level of coolant. Add coolant if needed. See Maintenance section.
oCheck for battery fluid leaks and proper fluid level. Add distilled water if needed. See Maintenance section.
Check the following components or areas for damage, modifications and improperly installed or missing parts:
oElectrical components, wiring and electrical cables
oHydraulic hoses, fittings, cylinders and manifolds
oFuel and hydraulic tanks
oDrive motors
oWear pads
oTires and wheels
oEngine and related components
oLimit switches, alarms and horn
oNuts, bolts and other fasteners
PRE-OPERATION INSPECTION
oPlatform entry gate
oBeacon and alarms (if equipped)
oBrake release components
oSafety arm
oPlatform extension
oScissor pins and retaining fasteners
oPlatform control joystick
oGenerator (if equipped)
oOutrigger housing and footpads (if equipped) Check entire machine for:
oCracks in welds or structural components
oDents or damage to machine
oBe sure that all structural and other critical components are present and all associated fasteners and pins are in place and properly tightened
oSide rails are installed and snap pins and bolts are fastened
Part No. 82233 | Genie | 13 |
