At the Platform Controls, Test the Manual Lowering

Operator's Manual	Second Edition · Third Printing

FUNCTION TESTS

9Push and hold the function enable button and activate the platform up function.

Result: The platform should raise.

10Push and hold the function enable button and activate the platform down function.

Result: The platform should lower. The descent alarm should sound while the platform is lowering.

11Push and hold the function enable button and raise the platform approximately 2 feet / 60 cm.

12Push in the red Emergency Stop button to shut off the engine.

13Pull out the red Emergency Stop button to the on position.

14Push and hold the function enable button. Activate the down function.

Result: The platform should lower. The descent alarm will not sound.

15Turn the key switch to platform control and restart the engine.

At the Platform Controls

Test Emergency Stop

16Push in the platform red Emergency Stop button to the off position.

Result: No functions should operate.

17Pull the red Emergency Stop button out to the on position.

Result: The green power light should come on.

18 Push the horn button.

Result: The horn should sound.

19Start the engine.

20Activate the platform up function.

Result: The platform should not raise.

21Push and hold a function enable/speed select button.

22Activate the platform up function.

Result: The platform should raise.

23 Release the function enable button.

Result: The platform should stop raising.

24Push and hold a function enable/speed select button. Activate the platform down function.

Result: The platform should lower. The descent alarm should sound while the platform is lowering.

Note: When performing the steer and drive function tests, stand in the platform facing the steer end of the machine.

25Press and hold the function enable switch.

26Depress the thumb rocker switch on top of the control handle in the direction identified by the blue triangle on the control panel.

Result: The steer wheels should turn in the direction that the blue triangle points on the control panel.

Genie GS-2668 RT & Genie GS-3268 RT

Part No. 82233