Operator's Manual | Second Edition · Third Printing |
|
|
|
|
SAFETY RULES
Do not operate a machine in the path of any crane or moving overhead machinery unless the controls of the crane have been locked out and/or precautions have been taken to prevent any potential collision.
No stunt driving or horseplay while operating a machine.
Do not lower the platform unless the area below is clear of personnel and obstructions.
Limit travel speed according to the condition of the ground surface, congestion, slope, location of personnel and any other factors which may cause collision.
Component Damage Hazards
Do not use any battery or charger greater than 12V to
Do not use the machine as a ground for welding.
Machines equipped with hydraulic shutoff valves: Be sure the valves (located by the hydraulic tank) are open before starting the engine.
Explosion and Fire Hazards
Do not start the engine if you smell or detect liquid petroleum gas (LPG), gasoline, diesel fuel or other explosive substances.
Do not refuel the machine with the engine running.
Refuel the machine and charge the battery only in an open,
Do not operate the machine in hazardous locations or locations where potentially flammable or explosive gases or particles may be present.
Damaged Machine Hazards
Do not use a damaged or malfunctioning machine.
Conduct a thorough
Be sure all maintenance has been performed as specified in this manual and the appropriate Genie service manual.
Be sure all decals are in place and legible.
Be sure the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located on the platform.
6 | Genie | Part No. 82233 |
