Operator's Manual | Second Edition · Third Printing |
|
|
|
|
OPERATING INSTRUCTIONS
Operation From Ground
1Turn the key switch to ground control.
2Pull out both ground and platform red Emergency Stop buttons to the on position.
3Start the engine.
To Position Platform
1Push and hold the function enable button.
2Activate the up function or the down function.
Drive and steer functions are not available from the ground controls.
Engine Idle Select | Switch |
Low idle | High idle |
Operation From Platform
1Turn the key switch to platform control.
2Pull out the ground and platform red Emergency Stop buttons to the position.
3Start the engine.
To Position Platform
1Move and hold a function enable/speed select switch.
2Activate the platform up/down function toggle switch in the desired direction of travel.
To Steer
1Press and hold the function enable switch.
2Turn the steer wheels with the thumb rocker switch located on the top of the control handle.
To Drive
1Press and hold the function enable switch.
2Increase speed: Slowly move the control handle off center.
Decrease speed: Slowly move the control handle toward center.
Stop: Return the control handle to center or release the function enable switch.
Use the
Machine travel speed is restricted when the platform is raised.
Drive Select Button
Machine on incline symbol:
Low range operation for inclines
22 | Genie | Part No. 82233 |
