Manuals / Genie / Lawn and Garden / Utility Vehicle

Genie GS-2668 RT, GS-3268 RT manual Contents, Contact us

Models: GS-3268 RT GS-2668 RT

1 32

Download 32 pages 63.83 Kb

Page 2

Contents

Operator's Manual	Second Edition · Third Printing

Important

Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, please call Genie Industries.

Contents
	Page
Safety	1
Legend	7
Controls	8
Pre-operation Inspection	11
Maintenance	13
Function Tests	16
Work Place Inspection	19
Operating Instructions	20
Transport Instructions	23
Decals	24
Specifications	26
Contact us:
Internet: http://www.genielift.com
e-mail: techpub@genieind.com

Copyright © 1998 by Genie Industries

First Edition: Ninth Printing, October 2000

Second Edition: Third Printing, January 2003

"Genie" is a registered trademark of

Genie Industries in the U.S.A. and many other countries. "GS" is a trademark of Genie Industries.

These machines comply with

ANSI/SIA 92.6-1999.

Printed on recycled paper

Printed in U.S.A.

Genie GS-2668 RT & Genie GS-3268 RT

Part No. 82233

Image 2

Genie GS-2668 RT, GS-3268 RT manual Contents, Contact us

Contents

Second Edition Third Printing with Maintenance InformationOperator’s Manual Contents Contact usDo Not Operate Unless Safety RulesDanger 1 Avoid hazardous situationsPhase to Phase Electrocution HazardsTip-over Hazards VoltageIf the tilt alarm sounds Do not alter or disable the limit switchesSAFETY RULES Second Edition · Third PrintingGS-2668 RT GS-3268 RTFall Hazards Collision HazardsDamaged Machine Hazards Component Damage HazardsExplosion and Fire Hazards Decal Legend Crushing HazardsBodily Injury Hazard diagnostic readout Tilt alarm under coverOutrigger housing if equipped 19 Hydraulic oil level indicator under coverGasoline/LPG models ControlsDiesel models Platform Controls models without outriggersGround Control Panel Gasoline/LPG models Platform Controls if equipped with auto level outriggersDiesel models 2 Always perform a pre-operation inspection Pre-operation InspectionFundamentals Do Not Operate UnlessPre-operation Inspection Observe and Obey MaintenanceMaintenance Symbols Legend Check the Engine Oil LevelHydraulic oil specifications Check the Hydraulic Oil LevelCheck the Batteries NORMAL range Scheduled MaintenanceCheck the Engine Coolant Level 3 Always perform function tests prior to use Function TestsAt the Ground Controls Test Emergency StopTest the Manual Lowering Test the Up/Down Functions and the Function Enable SwitchesAt the Platform Controls Test the HornTest the Tilt Sensor Operation Test Drive and BrakingTest Limited Drive Speed 4 Inspect the workplace Workplace InspectionWorkplace Inspection Do Not Operate UnlessStarting the Engine Operating InstructionsEmergency Stop 5 Only use the machine as it was intendedOperation From Platform SwitchOperation From Ground To Position PlatformAfter Each Use Operation From Ground with ControllerEngine Stop Button To Extend and Retract Platform Manual Platform ExtensionTo control individual outriggers Auto Level Outriggers if equippedFall Protection Positioning machine on a slopeBrake Release Operation Transport InstructionsSecuring to Truck or Trailer for Transit Observe and ObeyPart No. Description DecalsDecal Inspection Quantityoutriggers Additional decalsfor models with Ground Controls SideModel SpecificationsPlatform dimensions GS-2668 RTGS-3268 RT Platform dimensionsModel Drive speedsCalifornia Proposition Distributed By+4401476 Fax +5255566624584331