Genie GS-2668 RT Electrocution Hazards, Tip-over Hazards, Voltage, Minimum Safe, Phase to Phase

Operator's Manual Second Edition · Third Printing

SAFETY RULES

Electrocution Hazards

This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current.

Maintain safe distances from electrical power lines and apparatus in accordance with applicable governmental regulations and the following chart.

Voltage	Minimum Safe
Phase to Phase	Approach Distance
	Feet	Meters
0 to 300V	Avoid Contact
300V to 50KV	10	3.05
50KV to 200KV	15	4.60
200KV to 350KV	20	6.10
350KV to 500KV	25	7.62
500KV to 750KV	35	10.67
750KV to 1000KV	45	13.72

Allow for platform movement, electrical line sway or sag and beware of strong or gusty winds.

Keep away from the machine if it contacts energized power lines. Personnel on the ground or in the platform must not touch or operate the machine until energized power lines are shut off.

Do not operate the machine during lightning or storms.

Do not use the machine as a ground for welding.

Tip-over Hazards

Occupants, equipment and materials shall not exceed the maximum platform capacity or the maximum capacity of the platform extension.

Maximum capacity - GS-2668RT

Platform retracted	1250	lbs	567 kg
Platform extended - Platform only	950	lbs	431 kg
Platform extended - Extension only	300	lbs	136 kg
Maximum occupants - ANSI and CSA			4
Maximum occupants - CE
Outdoor use			4
Indoor use only			4

1250 lbs / 567 kg Extension only	Platform only
300 lbs / 136 kg 950 lbs / 431 kg
Maximum capacity - GS-3268RT
Platform retracted	1000	lbs	454 kg
Platform extended - Platform only	700	lbs	318 kg
Platform extended - Extension only	300	lbs	136 kg
Maximum occupants - ANSI and CSA			4
Maximum occupants - CE
Outdoor use			2
Indoor use only			4

1000 lbs / 454 kg Extension only	Platform only
300 lbs / 136 kg	700 lbs / 318 kg

2 Genie GS-2668 RT & Genie GS-3268 RT Part No. 82233