Set Supervisor Password
Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup.
Set User Password
Change, set, or disable password. It allows you to limit access to the system.
Save & Exit Setup
Save CMOS value settings to CMOS and exit setup.
Exit Without Saving
Abandon all CMOS value changes and exit setup.
2-1 Standard CMOS Features
CMOS Setup
Standard CMOS Features
Date (mm:dd:yy) | Mon, Feb 14 2005 | Item Help | |||
Time (hh:mm:ss) |
| 15:31:24 |
| Menu Level` | |
` IDE Channel 0 Master | [None] |
| Change the day, month, | ||
` IDE Channel 0 Slave | [None] |
| year |
| |
` IDE Channel 1 Master | [None] |
|
|
| |
` IDE Channel 1 Slave | [None] |
| <Week> |
| |
` IDE Channel 2 Master | [None] |
| Sun. to Sat. | ||
` IDE Channel 3 Master | [None] |
| <Month> | ||
|
|
|
| ||
Drive A |
| [1.44M, 3.5"] | Jan. to Dec. | ||
Drive B |
| [None] |
|
|
|
Floppy 3 Mode Support | [Disabled] |
| <Day> |
| |
|
|
|
| 1 to 31 (or maximum | |
Halt On |
| [All, But Keyboard] | allowed in the month) | ||
Base Memory |
| 640K |
| <Year> |
|
Extended Memory | 511M |
| 1999 to 2098 | ||
Total Memory |
| 512M |
|
|
|
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | |
F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
Date
The date format is <week>, <month>, <day>, <year>.
Week | The week, from Sun to Sat, determined by the BIOS and is display only |
Month | The month, Jan. Through Dec. |
Day | The day, from 1 to 31 (or the maximum allowed in the month) |
Year | The year, from 1999 through 2098 |
Time
The times format in <hour> <minute> <second>. The time is calculated base on the
IDE Channel 0/1 Master, Slave
IDE HDD
IDE Device Setup. You can use one of three methods: |
| |
Auto | Allows BIOS to automatically detect IDE devices during POST(default) |
|
None | Select this if no IDE devices are used and the system will skip the automatic | |
| detection step and allow for faster system start up. |
|
Manual | User can manually input the correct settings |
|
Access Mode | Use this to set the access mode for the hard drive. The four options are: | |
| CHS/LBA/Large/Auto(default:Auto) |
|
|
|
|
| - 29 - | BIOS Setup |
