Manuals / Gigabyte / Computer Equipment / Computer Hardware

Gigabyte GA-P31-ES3G user manual Standard CMOS Features, Date, Time, IDE Channel 0 Master/Slave

Models: GA-P31-ES3G

1 84

Download 84 pages 62.07 Kb

Page 35

Standard CMOS Features

2-3	Standard CMOS Features

		CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
			Standard CMOS Features
	Date (mm:dd:yy)		Wed, Feb 20 2008			Item Help
	Time (hh:mm:ss)		22:31:24		Menu Level`
` IDE Channel 0 Master			[None]
` IDE Channel 0 Slave			[None]
` IDE Channel 2 Master			[None]
` IDE Channel 2 Slave			[None]
` IDE Channel 3 Master			[None]
` IDE Channel 3 Slave			[None]
	Drive A		[1.44M, 3.5"]
	Floppy 3 Mode Support		[Disabled]
	Halt On		[All, But Keyboard]
	Base Memory		640K
	Extended Memory		510M
	Total Memory		512M
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Date

Sets the system date. The date format is week (read-only), month, date and year . Select the desired field and use the up arrow or down arrow key to set the date.

Time

Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key to set the time.

IDE Channel 0 Master/Slave

IDE HDD Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.

IDE Channel 0 Master/Slave

Configure your IDE/SATA devices by using one of the three methods below:

•	Auto	Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
•	None	If no IDE/SATA devices are used, set this item to None so the system will
		skip the detection of the device during the POST for faster system startup.
•	Manual	Allows you to manually enter the specifications of the hard drive when the
		hard drive access mode is set to CHS.
Access Mode		Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.

IDE Channel 2, 3 Master/Slave

IDE Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.

Extended IDE Drive

Configure your IDE/SATA devices by using one of the two methods below:

•	Auto	Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
•	None	If no IDE/SATA devices are used, set this item to None so the system will
		skip the detection of the device during the POST for faster system startup.
Access Mode		Sets the hard drive access mode. Options are: Auto (default), Large.

- 35 -

BIOS Setup

Image 35

Gigabyte GA-P31-ES3G Standard CMOS Features, Date, Time, IDE Channel 0 Master/Slave, IDE Channel 2, 3 Master/Slave

Contents

Users Manual GA-P31-ES3GGA-P31-ES3G MotherboardGA-P31-ES3G Jul. 24 MotherboardIdentifying Your Motherboard Revision CopyrightDisclaimer Documentation Classifications1-4-1 Dual Channel Memory Configuration Table of ContentsChapter 1 Hardware Installation 1-3-2 Installing the CPU Cooler4-2-1 Chapter 3 Drivers InstallationChapter 4 Unique Features Chapter 5 AppendixOptional Items Box ContentsGA-P31-ES3G GA-P31-ES3G Motherboard LayoutPCI Express Bus Block Diagram3 PCI Express 1-1 Installation Precautions Chapter 1 Hardware InstallationProduct Specifications x 24-pin ATX main power connector Page 1-3-1 Installing the CPU 1-3 Installing the CPU and CPU CoolerCPU Socket Lever Male Push Pin The Top of Female Push Pin Female Push Pin 1-3-2 Installing the CPU CoolerDirection of the Arrow Sign on the Male Push Pin 1-4-1 Dual Channel Memory Configuration 1-4 Installing the Memory1-4-2 Installing a Memory PCI Express x1 Slot PCI Express x16 Slot PCI Slot 1-5 Installing an Expansion CardParallel Port 1-6 Back Panel ConnectorsCoaxial S/PDIF Out Connector PS/2 Keyboard and PS/2 Mouse PortMic In Jack Pink Line In Jack BlueLine Out Jack Green FAUDIO 1-7 Internal ConnectorsBATTERY ATX12V+5V Only for 2x12-pinATX 1/2 ATX12V/ATX 2x2 12V Power Connector and 2x12 Main Power ConnectorSYSFAN1/SYSFAN2 6 FDD Floppy Disk Drive Connector3/4/5 CPUFAN/SYSFAN1/SYSFAN2/PWRFAN Fan Headers +12V / Speed ControlSATA21 7 SATA20 7 IDE IDE Connector8 SATA20/1/2/3 SATA 3Gb/s Connectors, Controlled by ICH7 SATA23 7 SATA2210 FAUDIO Front Panel Audio Header 9 PWRLED System Power LED Header11 FPANEL Front Panel Header 13 SPDIFO S/PDIF Out Header 12 CDIN CD In Connector15 CLRCMOS Clearing CMOS Jumper 14 FUSB1/FUSB2 USB Headers16 CI Chassis Intrusion Header 17 BATTERYGA-P31-ES3G Motherboard Chapter 2 BIOS Setup DEL BIOS Setup/Q-Flash A. The LOGO Screen Default2-1 Startup Screen B. The POST ScreenMain Menu Help Sample BIOS Version E4BIOS Setup Program Function Keys 2-2 The Main Menu„ PnP/PCI Configurations „ Standard CMOS Features„ Advanced BIOS Features „ Power Management SetupIDE Channel 0 Master/Slave Standard CMOS FeaturesDate TimeMemory Drive AFloppy 3 Mode Support Halt OnPassword Check Advanced BIOS FeaturesHard Disk Boot Priority First/Second/Third Boot DeviceCPU Thermal Monitor 2 TM2 Note Limit CPUID Max. to 3 NoteNo-Execute Memory Protect Note CPU Enhanced Halt C1ENotePATA IDE Set to Integrated PeripheralsOn-Chip Primary PCI IDE On-Chip SATA ModeUSB 2.0 Controller SMART LAN LAN Cable Diagnostic FunctionSATA Port 1/3 Set to USB ControllerParallel Port Mode Onboard LAN Boot ROMOnboard Serial Port Onboard Parallel PortSoft-Off by PWR-BTTN Power Management SetupPower On by Ring ACPI Suspend TypeKB Power ON Password Resume by AlarmPower On By Mouse Power On By KeyboardPCI3 IRQ Assignment PnP/PCI ConfigurationsPCI1 IRQ Assignment PCI2 IRQ AssignmentCPU Warning Temperature Reset Case Open StatusCurrent CPU Temperature Current CPU/POWER/SYSTEM FAN Speed RPMCPU Smart FAN Control Fine CPU Clock Ratio Note MB Intelligent TweakerM.I.TRobust Graphics Booster CPU Clock Ratio NotePCI Express Frequency Mhz O.C. FSB1600 CPUCPU Host Clock Control CPU Host Frequency MhzGMCH OverVoltage Control DDR2 OverVoltage ControlPCI-E OverVoltage Control FSB OverVoltage ControlLoad Optimized DefaultsSaveY/N?& ExitN Setup 2-10 Load Fail-Safe Defaults2-11 Load Optimized Defaults User Password Set Supervisor/User Password2-12 Supervisor Password2-14 Exit Without Saving 2-13 Save & Exit Setup3-1 Installing Chipset Drivers Chapter 3 Drivers Installation3-3 Technical Manuals 3-2 Application SoftwareThis page provides the basic system information 3-4 Contact3-5 System Drivers Installation3-6 Download Center System Requirements Chapter 4 Unique Features4-1 Xpress Recovery2 Before You BeginA. Installing Windows XP and Partitioning the Hard Drive Installation and Configuration4. After the operating system is installed, right-click the My Computer icon on your desktop and select Manage Figure 4. Go to Computer Management to check disk allocation. Xpress Recovery2 will save the backup file to the unallocated space black stripe along the topFigure 5. Please note that if there is no enough unallocated space, Xpress Recovery2 cannot save the backup file C. Using the Backup Function in Xpress Recovery2 B. Accessing Xpress Recovery2F. Exiting Xpress Recovery2 D. Using the Restore Function in Xpress Recovery2E. Removing the Backup What is DualBIOSTM? 4-2 BIOS Update Utilities4-2-1 Updating the BIOS with the Q-Flash Utility A. Before You BeginCopy BIOS completed - Pass B. Updating the BIOSStep 1. Update the BIOS Using the Internet Update Function 4-2-2 Updating the BIOS with the @BIOS UtilityB. Using @BIOS C. After Updating the BIOSThe EasyTune 5 Pro Interface Button Information Table 4-3 EasyTune 5 ProMeter Mode - Button Information Table 4-4 Easy Energy SaverThe Easy Energy Saver Interface A. Meter Mode C. Stealth Mode B. Total ModeTotal Mode - Button Information Table Chapter 5 Appendix 5-1 Configuring Audio Input and Output5-1-1 Configuring 2/4/5.1/7.1-Channel Audio A. Configuring SpeakersFront Speaker Out You may configure an audio environment on the Sound Effect tab B. Configuring Sound EffectC. Activating an AC97 Front Panel Audio Module D.Muting the Back Panel Audio For HD Audio OnlyA. Conneting a S/PDIF out Cable 5-1-2 Configuring S/PDIF OutB. Configuring S/PDIF out 5-1-3 Configuring Microphone Recording Recording Control Select Realtek HD Audio Input in the Mixer device listPlaying the Sound 5-1-4 Using the Sound RecorderRecording the Sound 5-2-1 Frequently Asked Questions 5-2 Troubleshootingto the motherboard 5-2-2 Troubleshooting Procedurecooler power cable cooler on the CPUCPU or CPU socket The power supplydevice, connector monitor might failOur Commitment to Preserving the Environment WEEE Symbol Statement5-3 Regulatory Statements Regulatory NoticesChina Restriction of Hazardous Substances Table Appendix GA-P31-ES3G Motherboard y Thailand Contact Usy G.B.T. INC. - U.S.A y G.B.T. INC USA - Mexicoy Spain y GIGABYTE Global Service Systemy Sweden y Italy