On-Chip Primary PCI IDE, On-Chip Sata Mode | Gigabyte GA-P31-ES3G

2-5	Integrated Peripherals

		CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
			Integrated Peripherals
	On-Chip Primary PCI IDE		[Enabled]			Item Help
	On-Chip SATA Mode		[Auto]		Menu Level`
x	PATA IDE Set to		Ch.0 Master/Slave
	SATA Port 0/2 Set to		Ch.2 Master/Slave
	SATA Port 1/3 Set to		Ch.3 Master/Slave
	USB Controller		[Enabled]
	USB 2.0 Controller		[Enabled]
	USB Keyboard Support		[Disabled]
	USB Mouse Support		[Disabled]
	Legacy USB storage detect		[Enabled]
	Azalia Codec		[Auto]
	Onboard H/W LAN		[Enabled]
`	SMART LAN		[Press Enter]
	Onboard LAN Boot ROM		[Disabled]
	Onboard Serial Port 1		[3F8/IRQ4]
	Onboard Parallel Port		[378/IRQ7]
	Parallel Port Mode		[SPP]
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

On-Chip Primary PCI IDE

Enables or disables the integrated IDE controller. (Default: Enabled)

On-Chip SATA Mode

Configures the integrated SATA controller.

Disabled	Disables the integrated SATA controller.
Auto	Lets BIOS set SATA devices to Combined or Enhanced mode.
	If your onboard SATA controller is automatically configured to Combined
	mode, you can manually re-configure it to Enhanced mode as needed.
	(Default)
Combined	Sets all SATA devices to operate in PATA mode. Combined allows a
	maximum of 4 ATA devices to be used simultaneously: two PATA devices
	plus two SATA devices.
Enhanced	Sets all SATA devices to operate in SATA mode.
Non-Combined	Sets all SATA devices to operate in PATA mode and disables the integrated
	IDE controller.

PATA IDE Set to

This item is configurable only if the On-Chip SATA Mode is set to Combined.

Ch.0 Master/Slave Sets the IDE channels to Ch. 0 Master/Slave. (Default)

Ch.1 Master/Slave Sets the IDE channels to Ch. 1 Master/Slave.

Disabled Disables the integrated IDE controller when Non-Combinedis selected.

SATA Port 0/2 Set to

This value is dependent on the On-Chip SATA Mode and PATA IDE Set to settings.

When PATA IDE Set to is configured to Ch. 1 Master/Slave, this option will be automatically set to Ch. 0 Master/Slave.

- 39 -

BIOS Setup

Image 39

Gigabyte GA-P31-ES3G user manual On-Chip Primary PCI IDE, On-Chip Sata Mode, Pata IDE Set to, Sata Port 0/2 Set to

Contents

GA-P31-ES3G Motherboard Identifying Your Motherboard Revision CopyrightDisclaimer Documentation Classifications Table of Contents Drivers Installation Optional Items GA-P31-ES3G Motherboard Layout Block Diagram Installation Precautions Hardware Installation CPU Product Specifications Bios Page Installing the CPU Installing the CPU and CPU Cooler CPU Socket Lever Installing the CPU Cooler Dual Channel Memory Configuration Installing the Memory Installing a Memory Installing an Expansion Card Back Panel Connectors Line In Jack Blue Line Out Jack GreenMic In Jack Pink Pwrled Internal Connectors GND 5 CPUFAN/SYSFAN1/SYSFAN2/PWRFAN Fan Headers FDD Floppy Disk Drive Connector SATA20/1/2/3 Sata 3Gb/s Connectors, Controlled by ICH7 IDE IDE Connector Faudio Front Panel Audio Header Pwrled System Power LED Header Fpanel Front Panel Header Spdifo S/PDIF Out Header Cdin CD In Connector Clrcmos Clearing Cmos Jumper FUSB1/FUSB2 USB Headers CI Chassis Intrusion Header Battery GA-P31-ES3G Motherboard Bios Setup Startup Screen Logo Screen Default Sample Bios Version E4 Bios Setup Program Function KeysMain Menu „ PnP/PCI Configurations „ Standard Cmos Features„ Advanced Bios Features „ Power Management Setup IDE Channel 2, 3 Master/Slave DateTime IDE Channel 0 Master/Slave Memory Floppy 3 Mode SupportDrive a Halt On HDD S.M.A.R.T. Capability Hard Disk Boot PriorityFirst/Second/Third Boot Device Password Check CPU Thermal Monitor 2 TM2 Note Limit Cpuid Max. to 3 NoteNo-Execute Memory Protect Note CPU Enhanced Halt C1ENote Sata Port 0/2 Set to On-Chip Sata ModeOn-Chip Primary PCI IDE Pata IDE Set to USB 2.0 Controller Smart LAN LAN Cable Diagnostic FunctionSata Port 1/3 Set to USB Controller Onboard Parallel Port Onboard LAN Boot ROMParallel Port Mode Onboard Serial Port Power On by Ring Soft-Off by PWR-BTTNPME Event Wake Up Power On By Keyboard Resume by AlarmHpet Mode Note Power On By Mouse PnP/PCI Configurations CPU Warning Temperature Reset Case Open StatusCurrent CPU Temperature Current CPU/POWER/SYSTEM FAN Speed RPM CPU Smart FAN Control CPU Frequency Robust Graphics BoosterCPU Clock Ratio Note Fine CPU Clock Ratio Note PCI Express Frequency Mhz FSB1600 CPUCPU Host Clock Control CPU Host Frequency Mhz Gmch OverVoltage Control DDR2 OverVoltage ControlPCI-E OverVoltage Control FSB OverVoltage Control Load Optimized Defaults Load Fail-Safe Defaults Set Supervisor/User Password Exit Without Saving Save & Exit Setup Installing Chipset Drivers Drivers Installation Technical Manuals Application Software System Contact Download Center Xpress Recovery2 Before You BeginSystem Requirements Installing Windows XP and Partitioning the Hard Drive Installation and ConfigurationPage Using the Backup Function in Xpress Recovery2 Accessing Xpress Recovery2 Using the Restore Function in Xpress Recovery2 Removing the BackupExiting Xpress Recovery2 Updating the Bios with the Q-Flash Utility Bios Update Utilities Updating the Bios Page Updating the Bios with the @BIOS Utility Using @BIOSAfter Updating the Bios EasyTune 5 Pro Interface Button Information Table EasyTune 5 Pro Easy Energy Saver Interface Meter Mode Meter Mode Button Information TableEasy Energy Saver Total Mode Total Mode Button Information TableStealth Mode Configuring Audio Input and Output Configuring 2/4/5.1/7.1-Channel AudioConfiguring Speakers Front Speaker Out Configuring Sound Effect Activating an AC97 Front Panel Audio ModuleMuting the Back Panel Audio For HD Audio Only Configuring S/PDIF Out Configuring S/PDIF outConneting a S/PDIF out Cable Configuring Microphone Recording Select Realtek HD Audio Input in the Mixer device list Using the Sound Recorder Recording the SoundPlaying the Sound Frequently Asked Questions Troubleshooting Start Troubleshooting Procedure END Our Commitment to Preserving the Environment Weee Symbol StatementRegulatory Statements Regulatory Notices China Restriction of Hazardous Substances Table Appendix GA-P31-ES3G Motherboard B.T. INC USA Mexico Contact Us Gigabyte Global Service System