Gigabyte GA-P31-ES3G Startup Screen, A. The LOGO Screen Default, B. The POST Screen, End Q-Flash

2-1 Startup Screen

The following screens may appear when the computer boots.

A. The LOGO Screen (Default)

<TAB>:POST Screen <DEL>:BIOS Setup/Q-Flash <F9>:XpressRecovery2 <F12>:Boot Menu <END>:Qflash

Function Keys

B. The POST Screen
	Award Modular BIOS v6.00PG, An Energy Star Ally
	Copyright (C) 1984-2008, Award Software, Inc.
	Intel P31 BIOS for P31-ES3G E4
Motherboard Model	.
	.
BIOS Version	.
	.
	<DEL>: BIOS Setup <F9>: XpressRecovery2	<F12>: Boot Menu	<End>: Qflash
	07/18/2008-P31-ICH7-6A89OG0DC-00

Function Keys:

Function Keys

<TAB>: POST Screen

Press the <Tab> key to show the BIOS POST screen. To show the BIOS POST screen at system startup, refer to the instructions on the Full Screen LOGO Show item on page 38.

<DEL>: BIOS Setup/Q-Flash

Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.

<F9>: Xpress Recovery2

If you have ever entered Xpress Recovery2 to back up hard drive data using the motherboard driver disk, the <F9> key can be used for subsequent access to XpressRecovery2 during the POST. For more information, refer to Chapter 4, "Xpress Recovery2."

<F12>: Boot Menu

Boot Menu allows you to set the first boot device without entering BIOS Setup. In Boot Menu, use the up arrow key <> or the down arrow key<> to select the first boot device, then press <Enter> to accept. To exit Boot Menu, press <Esc>. The system will directly boot from the device configured in Boot Menu.

Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot order will still be based on BIOS Setup settings. You can access Boot Menu again to change the first boot device setting as needed.

<End>: Q-Flash

Press the <End> key to access the Q-Flash utility directly without having to enter BIOS Setup first.

GA-P31-ES3G Motherboard - 32 -