Global Machinery Company ATBR1650-3PK instruction manual

Models: ATBR1650-3PK

1 47
Download 47 pages 56.11 Kb
Page 36
Image 36

8.Make sure no one is nearby before nailing. Never attempt to nail from both the inside and outside at the same time. Nails may rip through and/or fly off, presenting high risk to safety.

9.Watch your footing and maintain your balance with the tool. Make sure there is no one below when working in high locations, and secure the air hose to prevent danger if there is sudden jerking or catching.

10.On rooftops and other high locations, nail as you move forward. It is easy to lose your footing if you nail while leaning backward. When nailing against perpendicular surface, nail from the top to the bottom. You can perform nailing operations with less fatigue by doing so.

11.Place the nails with care. A nail will be bent or the tool can become jammed if you mistakenly nail on top of another nail or strike a knot in the wood. The nail may be thrown and hit someone, or the tool itself can react dangerously.

12.Do not leave the loaded tool or the air compressor under pressure for a long time out in the sun. Be sure that dust, sand, chips and foreign matter will not enter the tool in the place where you leave it setting.

13.Do not point the ejection port at anyone in the vicinity. Keep hands and feet away from the ejection port area.

14.Accidental firing can be extremely dangerous. When the air hose is connected, do not carry the tool with your finger on the trigger or hand it to someone in this condition.

15.Handle the tool carefully. As there is high pressure inside the tool that can be dangerous if a crack is caused by rough handling (dropping or striking). Do not attempt to carve or engrave on the tool.

16.Stop nailing operations immediately. If you notice something wrong or out of the ordinary with the tool.

17.Do not operate this tool if it does not contain a legible WARNING LABEL.

18.Never hang the tool on a waist belt or the like. Dangerous accidental firing may result.

19.Handle nails and their box carefully. If the nails have been handled roughly, they may be out of shape or their connector breaks, causing poor nail feed.

20.Avoid storing nails in a very humid or hot place exposed to direct sunlight.

6

Page 36
Image 36
Global Machinery Company ATBR1650-3PK instruction manual