Go-Video DDV9000 manual Sequential & Loop Play, Automatic Tracking

until the DUAL-DECK FEATURES menu

Set two tapes to play sequentially

or in a continuous loop.

Sequential & Loop Play

Two decks give you twice the playback features of a normal VCR. Sequential Play allows you to insert tapes in both decks and play one after another. Loop Play allows you to play both tapes in a continuous loop.

To activate Sequential or Loop Play:

1 Insert tapes in both decks.

2 Press MENU appears.

3 Press “4” repeatedly to set PLAYBACK MODE to:

Norm - Tapes play normally.

Seq - (Sequential) Deck 1 plays to the end of the tape, then Deck 2 plays to the end of the tape. If Auto Rewind is set to on, both tapes will rewind automatically when playback is finished.

Loop - Deck 1 plays to the end of the tape, then Deck 2 begins playing. While Deck 2 is playing, Deck 1 automatically rewinds to the beginning. When playback is finished in Deck 2, Deck 1 plays again and the process repeats in a continuous loop until you press the STOP key. Rewinding is automatic

regardless of the Auto Rewind setting.

Automatic Tracking

Your Dual-Deck VCR is equipped with an Automatic Digital Tracking System which is activated whenever you insert a tape to play. While tracking is adjusted, you’ll see ATR (Automatic Tracking) flash on the On-Screen Display.

If you need to adjust tracking manually:

1 Press the TRACKING & keys to move the white streaks up or down and out of the picture. This disables the ATR System.

2 To reactivate ATR, press the	ATR key on the remote
control.

What is Tracking?

Tracking adjusts the VCR’s heads to fine tune playback. Your Dual-Deck VCR has both automatic and manual tracking.

CHAPTER 5 - PLAYBACK FEATURES 25