15.Apply a generous amount of grease to an M8 x 58mm Shoulder Bolt (104) and to the inside of the right Link Arm Bracket (45).
Insert the end of the right Link Arm (30) into the right Link Arm Bracket (45). Attach the right Link Arm Bracket with the M8 x 58mm Shoulder Bolt (104) and an M8 Locknut (94).
Repeat this step on the other side of the elliptical exerciser.
15 |
| |
45 | 104Grease | |
30 | ||
| ||
| 94 |
16.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.
13
