11.While another person holds the Console (11) near the Upright (10), connect the console wire to the Wire Harness (64). Insert the excess wire into the Upright.
Tip: Avoid pinching the wires. Attach the Console (11) to the Upright (10) with four M4 x 16mm Screws (78).
12.Identify the Right Pedal (35), which is marked with an “R” sticker. Orient the Right Pedal and a Pedal Arm (32) as shown.
Attach the Right Pedal (35) to the Pedal Arm (32) with three M8 x 40mm Patch Screws (90) and three M8 Split Washers (97).
Repeat this step to attach the Left Pedal (not shown) to the other Pedal Leg (not shown).
11 | 11 |
|
|
| |
| Console Wire |
|
| 64 |
|
| 78 |
|
| 10 | 78 |
Avoid pinching | 78 | |
|
| |
the wires |
|
|
12 | 35 |
|
|
| |
| 32 |
|
| 97 |
|
| 90 |
|
11
