GDR10 Digital TV receiver

13

Connection 1 (If your TV has a SCART socket)

1Plug the SCART cable (which came with the receiver) into the SCART ‘out’ socket (you will find the socket on the back panel of the receiver labelled ‘TV’).

2Connect the other end to the SCART socket on your TV. Connecting your receiver in this way will give you a high-quality picture on your TV.

3Plug your receiver into a wall socket and switch it on. A green light should come on.

4Switch on your TV.

If there is more than one SCART connector on your TV, look in your TV instruction manual to check which one you should use.

1

2

3

4

1Outside aerial

2Receiver

3SCART cable (included with your receiver)

4To your TV’s SCART ‘in’ socket