Goodmans GDR10 Important information about searching for new channels, 2Automatic channel search from the receiver’s menu

27	GDR10A	DiggitalTVTVreceiverReceiver	27
	ADR10 Set Top Box

Important information about searching for new channels

The receiver gives you two ways to search for new TV and radio channels.

1Automatic channel search when the receiver is on standby

•As new channels and features become available, your receiver will automatically search for them. This will only happen when you put the receiver on standby. You will then see the standby light flash slowly to show that it is searching for new channels.

•When it has finished searching, the light will stop flashing and the receiver stays on standby as normal. If you do not put the receiver on standby after you’ve watched it, you will not be able to see any new channels that might become available.

•When you switch the receiver on again, and an automatic search has been done while it was on standby, you will see a message saying ‘The list of channels has been changed’. You can start watching TV by pressing the ‘OK’ button on your remote control.

2Automatic channel search from the receiver’s menu

•You can also search for new channels through the receiver’s menu. To do this, see the instructions on page 53.