24 | GDR10A | DiggitalTVTVreceiverReceiver |
How to turn the receiver off
If you usually watch television every day, you should leave the receiver on standby when you’re not watching it. You should only switch it off at the mains if you are away or you do not want to use the receiver for a long time (a month, for example).
Your receiver will automatically search for new channels when you switch to standby (see the section on
Your receiver can only search for and download updates when it is on standby.
You can put the receiver on ‘standby’ as follows.
1Press the remote control button labelled ‘stb’.
2Check that the receiver’s standby light turns red. This turns off the output from the receiver, and the TV picture will then turn off. You will then need to switch off your TV too if you want to stop watching it.
Do not unplug the receiver from the mains until the standby light (also the ‘on’ and ‘off’ light) stops flashing. Please see ‘Important information’ on
page 25.