GoVideo DV1040 manual DVD Playback

DVD PLAYBACK

•If you do not close the tray, it will be closed automatically in 5 minutes to protect it from damage.

•Some CD-R, CD-RW (MP3, AUDIO CD) may not play due to disparities in producing medium (PC, CD-Recorder), media type, and/or disc format.

1	Press [√] to turn on the unit.
	Press [DVD] to select DVD mode.
2	Press [OPEN/CLOSE] to open the disc tray.
3	Place your disc in the center of the disc
	tray, with the label facing upward.
4	Press [OPEN/CLOSE] to close the tray.
	The disc tray is closed and many discs will start playback
	automatically.
5	To start playback, press [PLAY].
	• In the case of DVD,
	DVD menus and titles are often displayed on screen.
	• In the case of S-VCD and VCD2.0:
	The disc menus are displayed on screen and are converted into
	PBC (Playback Back Control) mode.
	• In the case of CD, VCD1.1 and MP3:
	The disc plays in order of its track numbers.
6	To stop playback, press [	].
	To pause, press [PLAY] during playback.
	Press [PLAY] again to resume playback.
7	Press [OPEN/CLOSE] to open the disc tray.
8	Remove the disc, and press [OPEN/CLOSE] to close the tray.

Various Playback Methods

■For fast (or reverse) playback, press [√√] (or [œœ ]) in Playback mode.

*Unavailable during MP3 playback and with certain DVDs.

■For slow (or reverse) playback, press [√√] (or [œœ]) in Pause mode.

*Not available during VCD playback. The mark will appear.

■For still picture, press [PLAY] in Playback mode.

18