GoVideo DV1040 manual VCR Playback

VCR PLAYBACK

1	Press [√] to turn on the DVD/VCR.
	Press [VCR] to select VCR mode.
2	Insert the desired tape.
3	To start playback, press [PLAY].
	If the picture is flickering or poor quality, adjust it with the [TRACKING
	+/–] buttons.
4	To stop playback, press [ ].
	To pause playback, press [PLAY].
	Press [PLAY] again to resume playback.
5	Press [VCR EJECT] on the unit or [OPEN/CLOSE] on the
	remote control to eject the tape.

If the VCR detects contaminated head(s), it shows an on-screen message to bring this to your attention.

*If you see this message, clean the video heads with a commercial head- cleaner.

Various Playback Methods

■For fast forward (or reverse) playback, press [√√] (or [œœ]) in Playback mode.

■For Still picture, pause the playback, then press [PLAY/PAUSE] in Playback mode.

■For slow-motion playback, pause the playback, then press [√√] in Pause mode.

*NOTE: The VCR does not have Slow Reverse Playback.

■For Frame Advance, press [∞] in Pause mode. Each time you press this button, the picture advances one frame.

To Adjust Display

This product includes automatic Tracking so you can enjoy a clear picture without additional operation. However:

-If the screen is poor in Playback mode,

-If noises occur in the upper or lower part of the screen in slow playback mode,

-If paused picture vibrates up and down.

Then try using the [TRACKING +/–] buttons to adjust the display manually.

20