GoVideo DV1040 manual Auto Playback, Switch the VCR to TV or VCR mode automatically

USING ADVANCED VCR FEATURES

Auto Playback

■With Auto Play turned on (the factory default setting), the DVD+VCR player automatically starts playback when you insert a tape with its safety tab removed.

1	Press [SETUP] and select
	“FUNCTIONS”.
	Move	to “FUNCTIONS” with [v] and
	press [ENTER].
2	Press [ENTER] to switch between
	ON and OFF.
	- Select ON if you want a tape with its

safety tab removed to start playing automatically when the tape is inserted.

- Select OFF if you do not want a tape with its safety tab removed to start playing automatically.

SETUP

CLOCK SET

TIMER RECORDINGS

CHANNEL SET

FUNCTIONS

LANGUAGE SELECT

Move:			Select:		ENTER
End:
	SETUP
		FUNCTIONS
	Auto Play:
				ON
	Auto TV/VCR:			ON
	Index Search
	Go-To Search
	Set Auto Repeat
Move:			Select:
					ENTER
End:
	SETUP

Switch the VCR to TV or VCR mode automatically

■Auto TV/VCR Controls whether the DVD/VCR’s TV/VCR setting changes automatically to VCR- viewing mode when turned on.

1	Press [VCR] to enter VCR mode. Press [SETUP] and select
	“FUNCTIONS”.
	Move	to “FUNCTIONS” with [v] and press [ENTER].
	Press [ENTER] to switch between ON				FUNCTIONS
				Auto Play:			ON
	and OFF.
				Auto TV/VCR:			ON
2 - Select ON if you want the VCR to switch				Index Search
				Go-To Search
	to the VCR mode when the VCR is			Set Auto Repeat
	turned on or a cassette is inserted. This		Move:			Select:
								ENTER
	only applies if you connect the ANT.IN		End:
				SETUP
	and RF OUT jacks of your VCR and TV

and watch your VCR on channel 3 of your TV.

-Select OFF if you want the VCR to remain in TV mode. This is useful if you watch your VCR on the TV’s video input and you don’t want your antenna/cable signal interrupted by the VCR.

30