15
PREPARATION
VCR Operation Setup (Continued)Setting the VCR Setup Menu
11
Press MENU and the MAIN menu will appear.
22
Press vv/VVto select the SETUP menu, then
press ENTER.
The SETUP menu will appear.
33
Press vv/VVto choose a desired option on the
SETUP menu. Then press bb/BBto choose a
desired setting.
FUNCTION OSD
The on-screen display of this DVD+VCR can be turned on or off.
FUNCTION OSD can be switched between ON and OFF by
pressing b/B.
AUDIO MODE
The DVD+VCR has two separate audio playback systems, the
high quality VHS Hi-Fi system and standard NORMALmono
system. The same audio is generally recorded on both
systems. The VHS Hi-Fi system plays on separate (left and
right) channels, and the NORMALsystem plays monaural
sound. The normal track is always played so the cassette can
be played on a DVD+VCR that does not have VHS Hi-Fi.
AUDIO MODE can be switched between HI-FI and
NORMALby pressing b/B.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display to
the desired position when both MTS stereo and SAPsignals are
received. When only one of the MTS signal is received, the
DVD+VCR automatically selects the corresponding receiving
mode (Stereo or SAP) regardless of the selected position. For
normal operation, the display should be in the STEREO position.
The DVD+VCR will then record a STEREO program when available,
and record a mono program IF the program is NOTIN STEREO.
For weak STEREO and/or SAPbroadcasts, changing the dis-
play to mono may give clearer sound.
BROADCASTTYPE can be switched among STEREO, SAP,
and MONO by pressing b/B.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/NORMAL) is
in HI-FI position] for selecting the audio output signals from the
AUDIO OUTterminals (L ch and R ch), and RF.OUT.
This display setting should normally be left in the stereo posi-
tion, so that when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
AUDIO OUTPUTcan be switched among STEREO, LEFT,
and RIGHTby pressing b/B.
44
Press MENU when finished.
Channel Selection
This DVD+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:
Connect the DVD+VCR to the desired type of antenna or
cable TV system, as shown in Connecting Antenna/Cable TV
to DVD+VCR on page 11.

AUTO CHANNEL PROGRAMMING

11
Press MENU and the MAIN menu will appear.
22
Press vv/VVto select the TUNING menu, then
press ENTER.
The TUNING menu will appear.
33
Press VVto choose the SOURCE SELECT option,
then press bb/BBto select TUNER.
Press b/Brepeatedly to switch among TUNER, LINE1
and LINE2.
44
Press vv/VVto choose the AUTOCHANNEL SET
option, then press bb/BBto set the channel.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
• After AUTO CHANNELSET is complete, the TUN-
ING menu will close and return to the TV screen
automatically.
55
Make sure the TUNING BAND is set appropriate-
ly (TV or CATV).
•
TV : If you are using a standard antenna to receive
channels.
CATV : If you are using basic cable to receive chan-
nels.
66
Use CH (vv/VV) on the remote control or CH (VV//vv)
on the front panel to cycle the DVD+VCR
through the channels in memory.

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from
memory manually.
1Press VVto choose the CH. ADD/DEL option on the
TUNING menu. Press b/Bto select a channel to
add or erase.
2Press ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase channels.
3Press MENU to return to the TV screen.